The UV 8.2 back pressure regulator
is a diaphragm, piston or bellows-controlled spring-loaded proportional control valve for high pressures and small volumes.
It can be supplied with three types of connections: sockets, flanges and welding spigots. Each size of valve may be fitted with three different seats.
The valve cone can be fitted with a soft or metallic seal.
- Compliance to ATEX directive 2014/34/EU and DIN EN ISO 80079-36
- Leakage line connection, adjusting screw seal and lock
- Potential equalization among the valve components
- Grounding lug at the valve body
- Partial use of low-spark material
- Metallic valve seal
- Sealed spring cap complete with leakage line connection (incl. sealed adjusting screw). Must be installed with a leakage line capable of draining leaking medium safely and without pressure
- Pressure gauge connection
- Soft seal
- Valve cone and seat armored
- Different materials for diaphragm and seals, suitable for your medium
- Special connections: Aseptic, ANSI or JIS flanges, NPT, welding spigots; other connections on request
- Special versions on request